WATTS 900 4" 1ST CHECK ASSEMBLY
Model Overview
This was a reduced pressure assembly. It was produced from 1970 to 1988. The 3/4"-4" was a bronze bodied unit with an in-line check design. The 3/4"-2" size had to be removed from the piping for repair. All seats were replaceable on all sizes. The first check and relief valve springs were not contained when the assembly was disassembled. Special tools were suggested to perform a repair on this model. The 4" and 6" size body were made of cast iron and also had the in-line check design. The 4" was available in either bronze or cast iron body. The cast iron versions 4"-6" were either painted epoxy coated or galvanized to minimize rust. Special tools were needed to disassemble and repair this model.
- Model Series:
- 900 3/4" - 6"
- Packing Slip Description:
- WATTS 900 4"1ST CK ASSY
- EDP:
- 0889110
- Brand:
- Watts Water Technologies
Item is not low-lead compliant.
Safe Drinking Water Act:
This product contains leaded bronze and is not intended for applications anticipated for human consumption. More Information
Prop 65 Warning:
WARNING This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. More Information
